Siding in Milwood, Austin, TX — completed Austin Pro project

Completed June 2023

Siding & Exterior Painting in Milwood, Austin, TX (June 2023)

We re-sided a home in Austin's 78729 area with James Hardie fiber cement, then finished it in a fresh Sherwin Williams satin coat. The home traded aging exterior for a tough, cedar-grain look built for Central Texas weather.

Trades
Siding, Exterior Painting
Location
Milwood, Austin, TX
Completed
Project value
$25k–$30k

Standout outcome — A full re-clad and repaint finished in a single coordinated project

Timeframe — Approved February 27, 2023; installed June 23, 2023

Job APS-3602

Scope of Work

What We Did

Complete James Hardie HardiePlank Select Cedar Mill 8.25" Siding Installation · Full Sherwin Williams Satin Exterior Repaint of Siding, Trim, and Doors

Siding

This Austin siding project used James Hardie HardiePlank Select Cedar Mill in the 8.25" profile, a fiber cement product. We wrapped window beams, added 4" and 12" Hardie trim, and clad the porch columns for a tight, finished exterior. Fiber cement was the right call here because it holds up to 100°-plus summers and won't warp or rot like old wood siding. The result is a durable, low-maintenance shell that fits the aging 1980s–2000s homes common in Milwood.

James HardieHardiePlank Select Cedar Mill 8.25"Fiber Cement Siding$20k–$25k
Learn more about our siding →

Exterior Painting

We painted this Milwood home with Sherwin Williams Exterior Latex to complete the siding install. Coverage included fascia and soffits up to 24", garage doors, entry doors, and the gutters and downspouts. Latex was chosen for its flexibility and strong hold against UV fade in Central Texas heat. The full-exterior paint gave the home a unified, refreshed look that protects the new fiber cement underneath.

Sherwin WilliamsExterior LatexExterior PaintUnder $2k
Learn more about our exterior painting →

Wondering where this lands on price? See what siding typically costs in Austin →

How It Went

The Journey

From the first phone call to the final walkthrough — what actually happened on this project.

First contact

January 21, 2023

The homeowner reached out to Austin Pro on January 21, 2023, through a personal referral. From that first call we talked through the goals: replace aging siding and refresh the whole exterior color scheme.

Evaluation

We inspected the home's existing exterior and trim details around the 78729 area. That walk-through let us plan the window beam wraps, porch column wraps, and every surface that needed paint before any material was ordered.

Planning & approval

February 27, 2023

The project was approved on February 27, 2023, after we finalized the James Hardie material order and the Sherwin Williams color selection. We locked in the HardiePlank Select Cedar Mill 8.25" boards and the trim profiles with the delivery scheduled through ABC Supply.

Installation

June 23, 2023

The crew handled the full re-clad on June 23, 2023, installing Therma Wrap behind the new fiber cement siding. They wrapped the window beams in 3/8" Hardie material and trimmed the posts, then the painters coated fascia, soffit, doors, garage doors, and gutters in satin latex.

Completion

June 23, 2023

We closed out with a two-round punch and yard cleanup to leave the site clean. The project was invoiced on June 23, 2023 and closed December 7, 2023, with James Hardie's manufacturer warranty backing the new siding.

7 Photos

Project Photos

Every photo is this job, shot on site by our crew in Milwood, Austin, TX.

Want this on your house?

Book a Free Inspection
Pick Your Time

The Full Story

Inside This Project

Why did this Austin home need new siding?

Older exteriors around 78729 take a beating here. Summer heat over 100 degrees, spring hail, and constant cedar pollen wear down wood siding fast. This home was ready for a material that would stop that cycle.

  • Wood siding in this area tends to warp, crack, and hold moisture over time
  • Hail dents and chips softer cladding, leaving spots for rot
  • Limestone soil and dry heat swing the exterior between wet and bone-dry
  • The homeowner wanted a look that stayed sharp without yearly repairs

What material did we use, and why?

We chose James Hardie fiber cement in the HardiePlank Select Cedar Mill 8.25" profile. That board gives the warm grain of real cedar without the maintenance headaches wood brings. Fiber cement holds up to Austin's heat, resists hail impact, and won't feed the moisture problems that plague older wood exteriors. It also stands up to the pests and rot that come with our humid stretches. The wider 8.25" reveal gives the walls a clean, modern rhythm that suits homes built in this era.

What did the siding scope include?

This was more than swapping boards. We wrapped every trim detail so the new exterior read as one clean package.

  • JH 8.25" Select Cedar Mill across the main walls
  • James Hardie trim at 4" and 12" per linear foot
  • Wrapped window beams with 3/8" JH material, per beam and per floor
  • Wrapped posts and porch columns in matching Hardie trim
  • Therma Wrap installed as the weather barrier behind the siding
  • Materials delivered through ABC Supply

How did the exterior painting tie it together?

Once the siding was set, our painters coated the exterior in Sherwin Williams Exterior Latex with a satin sheen. Satin was the right call because it cleans easily and holds color through relentless Austin sun. The finish pulled every surface into one consistent scheme.

  • Fascia and soffit painted up to 24"
  • Garage doors and entry doors finished to match
  • Gutters and downspouts painted per linear foot
  • Punch-out work with two yard cleanups closed out the job

What were the results?

The home went from a tired, weather-worn exterior to a crisp, low-maintenance finish in one project. Everything got done on the June 23, 2023 install date. The homeowner came to us through a personal referral, which tells you how these jobs earn trust.

  • A unified cedar-grain look across siding, trim, and columns
  • Painted surfaces that shed dirt and cedar pollen
  • An exterior built to ride out heat, hail, and drought cycles

Straight Answers

Questions About This Project

Why is fiber cement better than wood for Austin homes?

Fiber cement doesn't warp, rot, or attract pests the way wood does. That matters in Central Texas, where heat, hail, and moisture swings destroy wood siding over just a few seasons.

How long did the siding and painting project take?

The work was completed on June 23, 2023, after approval back on February 27, 2023. Planning the material order and color scheme up front kept the on-site work efficient.

What did this project cost?

This siding and exterior painting job fell in the $25,000 to $30,000 range. Final pricing depends on your home's size, trim details, and the scope of surfaces painted.

Does the new siding come with a warranty?

James Hardie backs its fiber cement products with a strong manufacturer warranty. Combined with a quality Sherwin Williams satin coat, the exterior is set up to last for many years.

Get Your Free Siding Estimate

Tell us about your project — we'll call you back to schedule a free inspection. No pressure, honest numbers, 4.9 stars across 474 Google reviews.

Thank you — we received it and will call you shortly.

Something went wrong — please call (512) 550-0000.

Prefer to talk now? Call (512) 550-0000 · Mon–Fri 8–5