Siding & Exterior Painting in Scofield Farms, Austin, TX

How did this Scofield Farms siding project get started?

The homeowner found us through an online search and reached out on July 17, 2025. We inspected the home and began the estimate on July 21. The homeowner approved the siding and painting plan the next day, leaving time to prepare for the August site visit.

• The home is in Austin’s 78727 ZIP code, where summer work often means planning around 100°+ heat.
• This was a residential retail project covering two exterior trades, rather than a siding-only visit.
• The approved scope included work at the double garage door opening as well as the wall surfaces.
• Painting was part of the plan from the start because the selected siding arrived primed, not factory-finished.

What did the siding scope require beyond new boards?

This job called for more than fastening siding over a wall. The scope included 7/16-inch OSB wall sheathing, which matters because siding needs a sound, even surface behind it. It also called for a wrapped double garage door jamb, where the siding must meet a different opening cleanly. A homeowner can easily focus on the visible boards and miss those transitions. We treated the wall layers, trim, and opening as parts of the same siding job.

• The specified board was JH 7.25-inch Primed Smooth, giving the walls a consistent smooth profile.
• James Hardie trim included both 4-inch and 8-inch widths for different exterior details.
• The garage scope named a jamb wrap, not replacement of the garage door itself.
• Wall sheathing and siding appeared together in the work plan so both could be addressed during installation.

Why use primed fiber cement and paint it on site?

We chose James Hardie fiber cement siding with a primed, smooth face because this project also included a full paint scope. That let the crew install the boards and trim, then finish the new surfaces alongside nearby exterior details. In an Austin summer, the paint step deserves its own place in the schedule; primer is a base for the finish coat, not the finish itself. The method also kept the garage opening and wall trim within one coordinated exterior plan.

• Sherwin Williams SuperPaint was specified for the siding’s finish coat.
• The smooth board choice avoided adding a wood-grain texture to this exterior.
• Fiber cement gave the homeowner a siding material suited to an area that sees intense sun and occasional hail.
• The painted scope extended beyond the new boards, so nearby details would not be left out of the finish work.

How did the four-day installation unfold?

On-site work ran from August 8 through August 11, not in a single day. The crew handled the siding, sheathing, trim, and garage jamb work before completing the planned paint tasks. Keeping those trades in one visit helped us work through the places where new material met the existing exterior.

• The siding scope included separate wall-sheathing and James Hardie trim items.
• Two trim sizes gave the crew specified options for the project’s exterior edges and details.
• The double garage door jamb needed its own wrap rather than a generic wall-board finish.
• August 11 was the last day of work at the home; it was not the date the homeowner first contacted us.

Which exterior surfaces received paint?

The finish work covered far more than the new siding. We painted the fascia and soffit, plus doors, shutters, gutters, and downspouts listed in the scope. That distinction matters: a siding project can leave older adjacent surfaces looking separate if painting stops at the new boards.

• Fascia and soffit painting covered areas up to 24 inches, as specified for this job.
• The shutter work covered one set of two shutters.
• Door painting was included; the scope did not call for new doors.
• Gutters and downspouts received paint by linear foot, rather than replacement.
• The painting plan also allowed for other measured exterior surfaces within the approved scope.

What happened before the crew finished?

The final work included punch items and two yard cleanups. Those steps mattered on a job involving siding cuts, sheathing, trim, and paint: the exterior needed attention after the main installation, not just during it. The crew finished on August 11, leaving the new smooth siding and painted details as one completed exterior project.

• The scope listed punch work separately from the siding and paint installation.
• Yard cleanup appeared twice in the plan, accounting for debris during and after the exterior work.
• Both services were completed within the same four-day on-site window.