Siding & Exterior Painting in South Creek, Round Rock, TX (June 2025)

Why was this a section repair instead of a full siding replacement?

The April 4 inspection led us to plan a siding section repair, not a whole-house re-side. That distinction matters: a repair still has to account for the edges and features beside the new boards. Here, the scope reached beyond the siding itself to include trim, fascia, soffit, and garage door jamb details. Leaving those transitions out would have made the repair less complete, even if the new boards looked good on their own.

• The project called for primed Select Cedarmill siding in the repair area.
• Four-inch James Hardie trim was included by the linear foot.
• Double trim appeared as a separate detail in the work scope.
• The crew also had post caps to address.
• The garage opening required a wrap at the jambs, including a split-double arrangement described as two singles.

Which siding materials made sense for this Round Rock home?

We chose 8.25-inch Select Cedarmill fiber cement siding from James Hardie for the repaired section. Fiber cement is a practical material to consider where Central Texas exteriors face 100°+ summer days. The primed boards also gave the painting crew a defined surface to finish. A homeowner comparing siding bids should check the trim and fascia scope, not just the board name; this repair included both.

• The siding profile specified an 8.25-inch board width.
• The selected finish was Select Cedarmill rather than a smooth-face profile.
• Six-inch James Hardie fascia included a 1-by-2 detail.
• Paint for that fascia was handled separately from the fascia material.
• The repair scope covered fascia and soffit work as well as the siding section.

How did siding and painting fit into the same project?

The exterior painting was part of the repair plan, not an unrelated touch-up. We used Sherwin Williams SuperPaint exterior paint on the siding and included nearby fascia and soffit surfaces in the paint scope. That matters on a section repair: new primed material needs its finish, while adjoining details must be accounted for before the crew wraps up.

• The paint scope named the siding specifically.
• Fascia and soffit painting covered areas up to 24 inches.
• The garage door jamb wrap formed part of the exterior finish work.
• The work also called for gutter detachment and reset where access was needed.
• Exterior paint was included as its own material, separate from the primed siding.
• The painting portion used a Sherwin Williams product specified for this project.

What happened between the first call and the four-day installation?

The homeowner reached out on April 2, 2025, after working with us before. We inspected the home and began the estimate on April 4; the homeowner approved the project on April 11. Those planning dates were not installation days. Our crew began on-site work June 6 and finished June 9, giving the siding and painting trades a four-day window.

• The approved work combined a siding repair with exterior painting.
• Material delivery was included before the new section could be completed.
• The crew's scope included both installation tasks and final punch items.
• Gutters that needed removal for access were to be reset, not left detached.
• Two yard cleanups were included in the on-site work.

What made the completed repair more than new siding boards?

The crew finished the South Creek project on June 9, 2025. The result was a repaired siding section supported by new trim, fascia work, and paint on the surfaces named in the scope. It was not a full exterior replacement, and describing it that way would miss the care needed at a smaller repair's edges.

• James Hardie trim completed details beside the new siding.
• The fascia work included a specified six-inch piece and 1-by-2 detail.
• The garage jamb work addressed the opening rather than stopping at the wall face.
• Painted soffit areas were part of the finished exterior scope.
• Punch work and yard cleanup were included before the crew left the site.