Siding in Oak Ridge, Austin, TX

What did the April inspection put on the work list?

The homeowner found us through a community website and reached out on April 1, 2025. We inspected the Oak Ridge home on April 9 and began the estimate that day. The plan had to account for more than siding boards: wall sheathing, soffits, gable vents, shutters, and garage door jambs were all part of the exterior scope.

That broader list matters on a siding job. A fresh wall surface draws your eye to the edges around it, especially where the wall meets the soffit or a garage opening. We planned those adjoining tasks together rather than treating the new siding as the only visible finish.

• The scope called for replacement soffit work, not just paint on the existing soffit.
• Garage door jamb work included a split-double arrangement described as two singles.
• Vinyl gable vents were to be replaced and painted, with shutters installed.

Why use this siding profile on an Austin home?

We chose the primed Select Cedar Mill profile for the siding portion of the job. Its 8.25-inch board size gave us a defined lap-siding layout, while the cedar-mill texture provided the wood-look detail specified for this home. Fiber cement was a sensible material choice for an exterior that faces Austin's 100°+ summers.

The easy mistake is to focus on the siding's appearance and overlook what belongs behind it. This scope included OSB wall sheathing, so the wall assembly received attention alongside the finish material. That does not mean every wall needed replacement; it means sheathing was part of the planned work, rather than an afterthought.

• The siding scope specified both primed Select Cedar Mill and James Hardie 8.25-inch boards.
• The listed sheathing thickness was 7/16 inch.
• This was a retail project covering several exterior trades, not siding alone.

Which exterior surfaces received paint?

Sherwin Williams SuperPaint was specified for the siding. We also carried painting into the adjoining exterior features listed for this job, including fascia and soffits. On an older Austin home, those surfaces can make new siding feel disconnected if they remain outside the finish plan.

The paint work had distinct boundaries. The scope named garage doors, other doors, gutters, and downspouts, along with the replacement gable vents. We treated those as separate surfaces to cover, not as details that would somehow disappear once the siding was installed.

• Fascia and soffit painting was listed for areas up to 24 inches.
• Gutters and downspouts were measured by linear foot for painting.
• The scope called for paint on both the garage doors and other exterior doors.
• Replacement vinyl gable vents were included in the paint plan.

How did the window and door work fit the project?

The exterior work also included windows from NT Windows and doors from Pella. The windows were vinyl replacements. Those trades made this a broader home-exterior project than the siding and painting alone might suggest.

Openings deserve attention during a job like this because they sit within the same exterior walls receiving new work. Our siding scope also included wrapping garage door jambs. Keeping the window, door, and surrounding wall tasks in one project gave the homeowner a single plan for these connected areas.

• NT Windows supplied the vinyl replacement windows listed for the home.
• Pella was the specified vendor for the door portion.
• The garage opening had both a standard jamb-wrap item and a split-double jamb-wrap item in the scope.

How did the four on-site days come together?

The homeowner approved the project on April 13, 2025. On-site installation began June 28, and the crew finished July 1. That gap before installation was not construction time; the siding, painting, window, and door work took place within the stated four-day on-site window.

The sequence involved more than putting boards on a wall. The crew had sheathing, siding, soffit, vent, shutter, jamb-wrap, and paint tasks to coordinate. The work list also included two yard cleanups and punch items, followed by punch-out work. Those final tasks matter because a completed exterior should leave the surrounding yard and visible details addressed, too.

• July 1, 2025 was the last day of on-site work.
• The siding and trim scope included installing shutters and gable vents.
• Cleanup and punch items were expressly included in the project scope.