Siding in Austin, TX — completed Austin Pro project

Completed September 2025

Siding & Exterior Painting in Austin, TX

We re-clad a South Austin home in James Hardie fiber cement and finished it with a full Sherwin Williams paint job. The work was completed on September 3, 2025. The result is a modern vertical-panel exterior built to shrug off Central Texas heat and hail.

Trades
Siding, Exterior Painting
Location
Austin, TX
Completed

Standout outcome — An aging facade swapped for weatherproof fiber cement and a fresh, uniform coat

Timeframe — Approved August 6, 2025, installed September 3, 2025

Job APS-4586

Drag to Compare

Before & After

After: Siding in Austin, TX by Austin Pro
Before: Siding in Austin, TX
Before
After

Scope of Work

What We Did

James Hardie HardiePanel Vertical Siding Installation · Full Sherwin Williams Super Paint Exterior Finish

Siding

This project replaced the siding on a South Austin home with James Hardie HardiePanel Vertical Siding, a fiber cement product built for Central Texas weather. We also wrapped the porch columns with trim to tie the whole look together. Fiber cement resists warping and cracking through 100-degree summers and hail season, which is why it beats older wood and hardboard here. The finished exterior looks sharp and should hold up for decades. Homeowners searching for siding in Austin, TX get real durability from this material.

James HardieHardiePanel Vertical SidingFiber Cement Siding$5k–$10k
Learn more about our siding →

Exterior Painting

The exterior painting phase covered the new siding, fascia, soffit up to 24 inches, and the garage doors with Sherwin Williams SuperPaint. This coating stands up to the intense UV and heat that fade cheaper paints fast in South Austin. Painting fresh fiber cement correctly locks out moisture and helps the color last. The whole home came together with a clean, uniform finish. For exterior painting in Austin, TX, a quality paint on new siding makes a real difference.

Sherwin WilliamsSuperPaintExterior Paint$5k–$10k
Learn more about our exterior painting →

Wondering where this lands on price? See what siding typically costs in Austin →

How It Went

The Journey

From the first phone call to the final walkthrough — what actually happened on this project.

First contact

July 31, 2025

The homeowner found us through a customer referral and reached out on July 31, 2025. They wanted a permanent fix for an aging South Austin exterior rather than another coat of paint over failing boards. We talked through fiber cement options right away.

Evaluation

We assessed the existing exterior and the porch columns to plan the re-clad. The older 78745 home showed the wear typical of Central Texas sun and hail exposure. That inspection confirmed HardiePanel Vertical Siding as the right long-term material.

Planning & approval

August 6, 2025

The homeowner approved the project on August 6, 2025. We finalized the vertical panel layout, trim details, and paint selection. A permit was pulled before any work began to keep the job to code.

Installation

September 3, 2025

The crew installed the James Hardie vertical panels, wrapped the porch columns with 3/4-inch trim, and coated the siding, fascia, soffit, and garage doors with Sherwin Williams Super Paint. The work was completed on September 3, 2025. Materials arrived through Gtown Lumber and ABC Supply.

Completion

October 9, 2025

We closed out with two yard cleanups and a full punch-out, and the job formally closed on October 9, 2025. The homeowner ended up with a modern, weatherproof exterior backed by strong manufacturer warranties.

4 Photos

Project Photos

Every photo is this job, shot on site by our crew in Austin, TX.

Want this on your house?

Book a Free Inspection
Pick Your Time

The Full Story

Inside This Project

Why did this Austin home need new siding?

South Austin homes from the 1980s and 1990s take a beating out here. Old wood and hardboard siding swells, splits, and traps moisture after enough hail and summer sun.

The homeowner came to us through a referral and wanted a lasting fix, not another repaint over failing boards. Fiber cement solved that for good.

  • Homeowner reached out through a referral on July 31, 2025
  • Existing exterior showed age typical of older 78745 builds
  • Goal: a durable surface that would not need constant upkeep

What did the crew choose, and why?

We went with James Hardie HardiePanel Vertical Siding for two reasons: durability and design. Fiber cement will not warp, rot, or feed the termites that love our limestone-soil yards. Vertical panels also gave the home a clean, contemporary line that sets it apart from the horizontal-lap houses on the block. Here in Central Texas, where afternoons push past 100 degrees and spring dumps cedar pollen on everything, that combination of toughness and low maintenance matters. It is the kind of choice a homeowner rarely regrets.

  • HardiePanel Vertical Siding across the main sections
  • 3/4-inch Hardie trim to wrap the porch columns
  • Fiber cement rated for fire, impact, and moisture resistance

How did the porch and trim details come together?

Details make or break a re-clad. We wrapped the porch columns in matching Hardie trim so the posts read as part of the new siding, not an afterthought. The crew cut and fit each 3/4-inch piece on site for a tight, finished look. That step is where a lot of DIY siding jobs fall apart — the field panels look fine, but the trim and columns give away a rushed install.

  • Porch columns fully wrapped with Hardie trim pieces
  • Clean joints and consistent reveals throughout
  • Delivery and materials sourced through Gtown Lumber and ABC Supply

How did the exterior painting finish the job?

Once the siding was up, we sealed and coated the whole exterior with Sherwin Williams Super Paint. That paint was picked for its UV resistance, since South Austin sun fades cheaper coatings fast.

We painted the siding, the fascia and soffit up to 24 inches, and the garage doors so every surface matched. A permit was pulled before work began to keep everything to code.

  • Super Paint applied to all new siding sections
  • Fascia and soffit painted up to 24 inches
  • Garage doors coated to tie the facade together

What were the results?

The home went from a tired, aging exterior to a crisp, modern facade. Two yard cleanups and a full punch-out closed the job with no loose ends.

  • Completed September 3, 2025
  • Two-pass yard cleanup plus punch items
  • Project closed out October 9, 2025

Straight Answers

Questions About This Project

How long does a siding and paint project like this take?

This one was completed on September 3, 2025, about four weeks after the homeowner approved it on August 6. That gap is normal for scheduling and material delivery.

Why is fiber cement a good fit for Austin weather?

It does not warp in triple-digit heat, resists hail impact, and will not rot when moisture lingers. Those traits matter for older 78745 homes on shifting limestone soil.

What did this project cost?

The combined siding and painting work fell in the $15,000–$20,000 range. Final pricing depends on square footage, trim detail, and how much surface needs paint.

Do the siding and paint come with warranty protection?

James Hardie fiber cement carries a strong manufacturer warranty, and Sherwin Williams Super Paint is built for long-term color hold. We also ran a full punch-out so the homeowner started warranty life with a clean, correct install.

Get Your Free Siding Estimate

Tell us about your project — we'll call you back to schedule a free inspection. No pressure, honest numbers, 4.9 stars across 474 Google reviews.

Thank you — we received it and will call you shortly.

Something went wrong — please call (512) 550-0000.

Prefer to talk now? Call (512) 550-0000 · Mon–Fri 8–5