James Hardie
Sherwin Williams
Full James Hardie 8.25" Select Cedar Mill Fiber Cement Reclad | Complete Exterior Repaint in Sherwin Williams Super Paint
Schedule a Free Siding Inspection
4.9 Rating
Full James Hardie 8.25" Select Cedar Mill Fiber Cement Reclad | Complete Exterior Repaint in Sherwin Williams Super Paint
This Round Rock siding project swapped worn original cladding for James Hardie fiber cement. We installed the 8.25-inch Select Cedar Mill profile over fresh 7/16-inch OSB sheathing. Fiber cement was chosen because it shrugs off 100-degree summers, hail, and moisture that warp wood. The finished home now reads sharp and stays protected for the long haul.
.avif)
The exterior painting scope covered every visible surface on this Round Rock home. We coated the new siding, fascia and soffit up to 24 inches, garage doors, gutters, and downspouts with Sherwin Williams Super Paint. Super Paint was picked for its fade and mildew resistance under harsh Texas sun. The color-matched finish ties the whole exterior together.
The homeowner found Austin Pro through an internet search and reached out on December 17, 2025. We connected quickly and set up a time to look at the home on Ashmere Loop. By December 18 the project moved into our prospect pipeline.
We inspected the existing wood siding and the wall condition beneath it. The original cladding showed the wear you expect from years of Round Rock heat, hail, and moisture. We confirmed the home would need fresh 7/16-inch OSB sheathing along with a full reclad.
We walked the homeowner through the James Hardie Select Cedar Mill profile and the Sherwin Williams Super Paint plan. The scope covered siding, sheathing, trim wrap, and a full exterior repaint. The project was approved on February 4, 2026.
The crew installed new 7/16-inch OSB sheathing, then hung the 8.25-inch Select Cedar Mill boards. We wrapped the split double garage door jambs and primed the siding before painting. Fascia, soffit, gutters, downspouts, and garage doors all got coated on April 9, 2026.
We ran two full punch-out and yard-cleanup passes to close the job clean. The finished exterior read as one uniform, protected surface. The project was completed and invoiced the same day, April 9, 2026.
We tore off the original wood siding on this Round Rock home and installed James Hardie fiber cement, then finished the entire exterior in Sherwin Williams Super Paint. The whole job wrapped in a single day on April 9, 2026, leaving a sharp, weather-ready exterior built for Central Texas.
The original wood siding had taken years of abuse. Round Rock summers push past 100 degrees, spring hail hits hard, and moisture works into any seam it can find.
Wood siding does not win that fight for long. Once it warps, cups, and lets water behind it, the damage spreads fast.
Siding is only as good as what sits behind it. Before a single Hardie board went up, we installed fresh 7/16-inch OSB wall sheathing across the home.
This is the step homeowners never see and often skip. Nailing new siding over old, soft, or uneven sheathing traps hidden problems and leaves your fasteners with nothing solid to grip. New OSB gives the fiber cement a flat, sound base and a clean moisture line. It also lets the crew catch any framing issues while the walls are open. Lumber for this came through Gtown Lumber and Supply, with the fiber cement delivered through Southern Shingles.
Fiber cement is the right material for Central Texas, and James Hardie is the standard we trust. The Select Cedar Mill line gives you that cedar texture without the maintenance headaches of real wood.
We primed the Select Cedar Mill boards, then coated everything in Sherwin Williams Super Paint. The scope went well beyond the siding itself.
We use Sherwin Williams Super Paint here because it resists fading and mildew under sun that punishes cheaper coatings. Paint came direct from Sherwin Williams Co.
The home went from tired and weathered to crisp in one day. Every surface now carries a uniform, protected finish.
The hands-on install and paint wrapped in a single day. The longer stretch was planning and material staging between approval in early February and the April start.
Yes, especially with our hail and heat. Fiber cement absorbs impact and holds its shape where vinyl can crack or sag, and it takes paint like Super Paint that lasts through Texas sun.
This reclad and full repaint landed in the $15,000 to $20,000 range. Final pricing depends on wall area, sheathing condition, and paint scope.
We painted the full exterior on this job, including gutters, downspouts by the foot, fascia, soffit, and the garage doors. A matched finish across every surface is what makes a reclad look complete.
Austin Pro crafts exteriors that not only captivate but also promise steadfast protection and reliability, embodying the vibrant spirit of Austin in every facade. Your home's exterior is its silent storyteller and first impression; let us help it speak volumes without uttering a word.
