Completed January 2026
Siding in Hyde Park, Austin, TX
Plus Windows, Exterior Painting on the same job
We re-sided a 1950s Hyde Park home in Austin, TX with James Hardie fiber cement and swapped its tired windows for new NT vinyl units. The whole exterior was rebuilt, insulated, and repainted as one well-planned project.
- Trades
- Siding, Windows, Exterior Painting
- Location
- Hyde Park, Austin, TX
- Completed
- Brands installed
- James Hardie, NT Windows, Sherwin Williams
Standout outcome — A fully re-clad, re-insulated, hail-ready exterior
Timeframe — Approved Sept 25, 2025; completed Jan 8, 2026
Job APS-4633
Drag to Compare
Before & After
Scope of Work
What We Did
Complete James Hardie Select Cedar Mill Fiber Cement Re-Cladding · Energy-Efficient NT Executive Vinyl Window Replacement
Siding
This siding project in Austin, TX replaced tired exterior walls with James Hardie fiber cement in the Select Cedar Mill 5.25" profile. Fiber cement holds up to Central Texas heat and hail far better than old wood or vinyl. Our crew added new OSB sheathing and R-13 insulation before install, then painted with Sherwin Williams Super Paint. The four days on site left the home tighter, cleaner, and built to last.
Learn more about our siding replacement →Windows
For this windows job in Austin, TX we fit NT Windows Executive vinyl replacement units throughout the home. Vinyl frames resist warping and hold their seal through 100-degree summers and sudden cold snaps. Pairing the windows with a full re-side meant we could flash every opening the right way. Homeowners get better comfort, lower energy bills, and a crisp finished look.
Learn more about our window replacement →Exterior Painting
Service price ranges are for that work before any discounts. Any total project cost mentioned on this page may include applied discounts.
Wondering where this lands on price? See what siding typically costs in Austin →
How It Went
The Journey
From the first phone call to the final walkthrough — what actually happened on this project.
First contact
The homeowner found us through an internet search and reached out on Sept 19, 2025. They wanted to replace worn siding and aging windows on their Hyde Park home. We set up a visit to walk the exterior and talk through options.
Evaluation
During the assessment, we inspected the existing cladding, wall sheathing, and windows. We found sheathing that needed full replacement and gaps letting in heat and cedar pollen. We measured the walls and confirmed the scope for both siding and window work.
Planning & approval
We built an estimate covering James Hardie Select Cedar Mill siding, NT Executive Vinyl windows, insulation, and paint. The homeowner approved the project on Sept 25, 2025. We then pulled the required City of Austin permit before scheduling the crew.
Installation
The crew tore off the old siding, installed 7/16-inch OSB sheathing, and added R-13 roll-in insulation. They hung the 5.25-inch Select Cedar Mill siding, set the NT vinyl windows, and painted with Sherwin Williams Super Paint. Fascia, soffit, gutters, shutters, and gable vents were all addressed.
Completion
We ran two yard cleanups and a full punch-out to finish strong. We completed the project on Jan 8, 2026, and closed it out on Feb 19, 2026. The home came away with a sealed, hail-ready exterior backed by James Hardie's product warranty.
4 Photos
Project Photos
Every photo is this job, shot on site by our crew in Hyde Park, Austin, TX.
Want this on your house?
The Full Story
Inside This Project
Why did this Austin home need new siding?
Older homes near 51st Street take a beating here. Summers push past 100 degrees, spring brings hail, and cedar pollen finds every gap. The original cladding was worn and no longer sealing the walls well.
- Removed old siding down to the framing
- Found sheathing that needed full replacement
- Added gutters repainting to match the new look
- Sealed gaps that let heat and pollen inside
What materials did we use, and why?
We chose James Hardie Select Cedar Mill in a 5.25-inch profile for its strength and clean wood-grain look. Fiber cement shrugs off hail and won't rot or warp in Central Texas heat. It's simply the most durable siding for this climate.
- 5.25" Select Cedar Mill primed fiber cement lap siding
- New 7/16" OSB wall sheathing for a solid, flat base
- R-13 roll-in insulation to fight the summer heat load
- Sherwin Williams Super Paint for lasting, fade-resistant color
- Replaced and painted vinyl gable vents
How did the window replacement go?
We installed NT Executive Vinyl replacement windows alongside the siding work. Vinyl frames don't swell or warp when temperatures climb past 100 degrees. The new units seal tight, so drafts and cedar pollen stay outside.
- NT Executive Vinyl replacement windows throughout
- Tighter seals for lower cooling bills
- Better sound control on a busy street
- Coordinated with the siding tear-off for a clean fit
How did the installation come together?
The crew handled tear-off, sheathing, insulation, siding, windows, and paint in a tight sequence. We pulled a City of Austin permit before work began. Materials came from ABC Supply, Lowe's, McCoys, and local lumber yards.
- Pulled and passed the City of Austin permit
- Painted fascia and soffit up to 24 inches
- Painted gutters and downspouts per linear foot
- Installed shutters and gable vents
- Ran two yard cleanups plus a full punch-out
What were the results?
The home now has a sealed, insulated, hail-resistant shell built for decades of Texas weather. Fresh Cedar Mill siding, crisp paint, and new windows transformed the curb appeal. Everything was completed on Jan 8, 2026.
- Complete exterior re-clad with fiber cement
- Energy-efficient vinyl windows installed
- Uniform Sherwin Williams finish across siding and trim
- Project value in the $50k–$60k range
Straight Answers
Questions About This Project
Why is James Hardie siding good for Austin homes?
Fiber cement handles our 100-degree summers, spring hail, and heavy cedar pollen far better than wood. It won't rot, warp, or feed termites, which matters for older homes on limestone soil.
How long did this project take?
The job was approved on Sept 25, 2025 and completed on Jan 8, 2026. Retail exterior projects of this size run over several weeks once permits and materials are set.
What did this siding and windows project cost?
This project fell in the $50k–$60k range. That covered siding, sheathing, insulation, NT vinyl windows, paint, gutters repainting, permits, and cleanup.
Do the new windows really lower energy bills?
Yes. The NT Executive Vinyl units seal tighter than aging windows and pair with new R-13 insulation. Together they cut heat gain during Austin's brutal summers. Want the same for your home? Reach out to Austin Pro .
Get Your Free Siding Estimate
Tell us about your project — we'll call you back to schedule a free inspection. No pressure, honest numbers, 4.9 stars across 474 Google reviews.
Prefer to talk now? Call (512) 550-0000 · Mon–Fri 8–8, Sat 8–6, Sun 12–5
Keep Exploring
More Austin Pro Work
Windows
Siding
SidingOther work near this address
