
Completed April 2026
Siding & Exterior Painting in Shady Hollow, Austin, TX (April 2026)
We replaced the entire exterior siding on a home in Shady Hollow, Austin, TX, using James Hardie fiber cement, then painted it top to bottom with Sherwin Williams SuperPaint. The 1980s–2000s-era home went from tired and weathered to a clean, storm-ready wall system.
- Trades
- Siding, Exterior Painting
- Location
- Shady Hollow, Austin, TX
- Completed
- Brands installed
- James Hardie, Sherwin Williams
Standout outcome — A full tear-off and repaint that reset the home's exterior for decades
Timeframe — Approved Feb 23, 2026; completed Apr 6, 2026
Neighborhood / City — Shady Hollow, Austin, TX (78748)
Job APS-4742
Drag to Compare
Before & After


Scope of Work
What We Did
Full James Hardie HardiePlank Smooth 8.25 Siding Replacement · Complete Sherwin Williams SuperPaint Exterior Finish
Siding
This Austin siding project replaced worn exterior boards with James Hardie HardiePlank Smooth 8.25" fiber cement. Our crew handled a full tear off, including a double-layer section, then wrapped the fascia, soffit, columns, and garage jambs. We chose fiber cement because it shrugs off Central Texas heat, hail, and moisture without warping or rotting. The result is a durable, low-maintenance exterior built to last decades in Shady Hollow.
Learn more about our siding replacement →Exterior Painting
This Austin exterior painting job coated fresh James Hardie siding with Sherwin Williams SuperPaint. We painted the siding, fascia, and open soffits for a consistent, weather-ready finish. SuperPaint stands up well to intense summer sun and helps seal the surface against Central Texas moisture. Because the siding came pre-primed, the color went on smooth and adhered tightly for lasting protection in Shady Hollow.
Learn more about our exterior house painting →Service price ranges are for that work before any discounts. Any total project cost mentioned on this page may include applied discounts.
Wondering where this lands on price? See what siding typically costs in Austin →
How It Went
The Journey
From the first phone call to the final walkthrough — what actually happened on this project.
First contact
The homeowner found Austin Pro through a community webpage and reached out on Feb 3, 2026. We talked through the aging exterior and the goal of a full siding and paint refresh. We started scoping the project the next day, Feb 4.
Evaluation
We inspected the home and found a double layer of existing siding plus doubled-up aluminum or vinyl fascia and soffit. Worn trim around the front gable, porch columns, and garage door jambs was also noted. These findings shaped the tear-off scope.
Planning & approval
We built the estimate around HardiePlank Smooth 8.25 boards and Sherwin Williams SuperPaint. The homeowner reviewed the scope, including gable deco beam wraps and column details, and approved the project on Feb 23, 2026. Materials were scheduled for delivery ahead of the crew.
Installation
Crews performed a full double tear-off, then installed the 8.25 smooth fiber cement over multiple days in mid-March. They wrapped the front gable beams, porch columns, and garage door jambs, and set new fascia and open soffit. Painting with SuperPaint followed shortly after.
Completion
We finished the job on Apr 6, 2026, with two rounds of yard cleanup and punch-item work before final walkthrough. Old gutters were disposed of and the exterior was left with one clean, unified color.
7 Photos
Project Photos
Every photo is this job, shot on site by our crew in Shady Hollow, Austin, TX.
Want this on your house?
The Full Story
Inside This Project
Why did this Shady Hollow home need new siding?
The old cladding had reached the end of its life. Central Texas is hard on exteriors, and this home showed it after years of sun, hail, and cedar pollen.
- The wall assembly had a double layer of old siding to remove
- Fascia and soffit were aging aluminum or vinyl, also doubled up
- Trim details around the front gable and garage looked worn
What did the crew find during tear-off?
Some of the most useful work happened once we opened things up. The home had a double-layer siding condition, which is common on older Shady Hollow houses that were re-sided instead of stripped years back. That extra layer traps heat and hides problems, so we did a full double tear-off down to a clean surface. The fascia and soffit had the same doubled-up setup, so those came off too. Working this way costs a little more labor, but it lets us start fresh and catch anything the old siding was covering. A homeowner who just layers new boards over old ones almost always regrets it later.
What materials did we use, and why?
We chose HardiePlank Smooth 8.25 boards because fiber cement is built for this climate. It shrugs off the 100-degree heat and hail that beat up wood and vinyl here.
- 8.25 Prime Smooth siding for the main walls
- Hardie wrap on the front gable deco beams
- Wrapped porch columns and garage door jambs (doubled)
- New fascia and open soffit to match the fresh look
Smooth profile gives the home a modern, clean face. Fiber cement also resists the cedar pollen buildup that clings to rougher textures each spring.
How did the painting go?
Once the siding was set, we coated everything with Sherwin Williams SuperPaint. The primed Hardie boards take paint well, which means a smooth, even finish.
- SuperPaint applied to all new siding sections
- Fascia and open soffit painted to match
- Wrapped columns and jambs finished for a seamless look
We painted shortly after the siding wrapped in mid-March. That sealed the fiber cement and gave the home one consistent color.
What were the results?
The home now has a tight, low-maintenance exterior that looks brand new. Siding and paint were finished by April 6, 2026, and the project closed May 14.
- Two yard cleanups and punch-item visits before sign-off
- Old gutters disposed of during the tear-off
- A single, unified color across walls, trim, and soffits
The finish should hold up far better than the material it replaced. That matters in a neighborhood full of homes facing the same aging exteriors.
Straight Answers
Questions About This Project
Why is fiber cement a good fit for Austin homes?
It handles extreme heat, hail, and moisture without warping or rotting. That durability makes it a smart long-term choice for Shady Hollow's older housing stock.
How long did the whole project take?
The homeowner reached out on Feb 3, 2026, and approved the job on Feb 23. Siding went in over several days in mid-March, with painting right after and completion by early April.
What did this siding and paint project cost?
This retail project fell in the $15k–$20k range. Final pricing depends on tear-off complexity, trim work, and the amount of surface to paint.
Do you handle both siding and painting on one job?
Yes. Doing both together means the crew coordinates tear-off, install, and finish in one timeline, so the color and trim line up cleanly.
Get Your Free Siding Estimate
Tell us about your project — we'll call you back to schedule a free inspection. No pressure, honest numbers, 4.9 stars across 474 Google reviews.
Prefer to talk now? Call (512) 550-0000 · Mon–Fri 8–8, Sat 8–6, Sun 12–5
Keep Exploring
More Austin Pro Work
Siding
Siding
SidingOther work near this address










