
Completed July 2026
Siding in Circle C North, Austin, TX
Plus Exterior Painting, Gutters on the same job
We completed siding and gutters on an Austin, TX home over four on-site days. New fiber cement siding, painted trim, and seamless aluminum gutters gave the exterior a finished, coordinated look.
- Trades
- Siding, Exterior Painting, Gutters
- Location
- Circle C North, Austin, TX
- Completed
- Brands installed
- James Hardie, Sherwin Williams
Standout outcome — The siding scope included a repair at the patio's back-left corner, not just new boards on the wall.
Timeframe — July 25–28, 2026; four days of on-site work.
Vendor and product — James Hardie 8.25-inch Primed Select Cedar Mill siding; custom Senox 6-inch seamless gutters.
Job APS-4868
Drag to Compare
Before & After


Scope of Work
What We Did
James Hardie 8.25-Inch Cedar Mill Fiber Cement Siding · Custom 6-Inch Seamless Aluminum Gutters and Exterior Trim Work
Siding
This Siding in Austin, TX project used James Hardie fiber cement in the 8.25-inch Primed Select Cedar Mill profile. Brick-pocket trim and garage-door jamb wraps addressed transitions beyond the siding panels. Fiber cement was a practical choice for an exterior exposed to Austin’s intense summer heat. Sherwin Williams SuperPaint completed the primed siding.
Learn more about our siding replacement →Exterior Painting
Gutters
This Gutters in Austin, TX project included custom-specified Senox 6-inch seamless aluminum gutters. The six-inch size provides a wider channel for roof runoff during heavy rain. Seamless aluminum also limits joints along each gutter run. The gutters completed the home’s siding and exterior-paint scope.
Service price ranges are for that work before any discounts. Any total project cost mentioned on this page may include applied discounts.
Wondering where this lands on price? See what siding typically costs in Austin →
How It Went
The Journey
From the first phone call to the final walkthrough — what actually happened on this project.
First contact
May 15, 2026The homeowner reached Austin Pro through the website on May 15, 2026. We started scoping the project on May 16. The initial request developed into a siding and gutter scope for the Austin home.
Evaluation
The evaluation covered the siding section and the adjoining exterior details. Those included brick-pocket trim, garage door jamb wraps, and a birdsmouth repair at the patio's back-left corner.
Planning & approval
June 19, 2026The plan specified James Hardie Primed Select Cedar Mill fiber cement siding and custom 6-inch seamless aluminum gutters. It also included Sherwin Williams Super Paint and front-entry door installation using homeowner-supplied materials. The homeowner approved the project on June 19, 2026.
Installation
July 28, 2026The crew worked on site from July 25 through July 28, 2026. The scope covered siding, brick-pocket trim, patio-corner repair, garage door jamb wraps, gutters, and paint work. The front-entry door work was installation only, with no interior painting.
Completion
July 28, 2026On-site work finished July 28, 2026. The project scope included punch-out items and two yard cleans as part of the finishing work.
5 Photos
Project Photos
Every photo is this job, shot on site by our crew in Circle C North, Austin, TX.
Want this on your house?
The Full Story
Inside This Project
What did this Austin exterior project need to cover?
The homeowner reached out through our website on May 15, 2026. By May 16, we were scoping the project. The eventual scope went beyond a siding section: it also covered brick-pocket trim, paint, gutters, and work around the front entry and garage openings. Those details matter because siding changes the edges of a house, not only its broad wall surfaces.
The scope included a birdsmouth repair at the back-left corner of the patio. That gave us a specific repair point to address within the exterior work. It was a targeted repair, not a whole-house structural repair. For an Austin homeowner reviewing a siding proposal, that distinction helps separate the planned work from assumptions about what crews might find behind a wall.
Why use this fiber cement siding here?
We selected 8.25-inch Primed Select Cedar Mill fiber cement siding for the siding section. The primed boards gave the paint crew a defined finish surface, while the Cedar Mill texture set the look of the new work. Fiber cement was a practical choice for an Austin exterior exposed to long stretches of 100°+ summer heat.
Board selection was only part of the decision. The scope also called for 1-by-4 brick-pocket trim where the siding work met that detail. A homeowner comparing bids could miss that trim and focus only on the board price. Here, the trim was part of the planned installation, so the edge treatment had its own material and labor allowance. That is a more useful picture of the job than a siding product name alone.
How did the four-day installation come together?
On-site work ran from July 25 through July 28, 2026, four days in all. During that window, the crew handled the siding section and its related trim, repair, and finish tasks.
- The scope included a wrap for a split-double garage door jamb, counted as two singles.
- A separate garage door jamb wrap was also included.
- Front-entry door installation was included, with materials to be supplied by the homeowner before siding installation.
- That entry-door work covered installation only, not interior painting.
Those opening details can affect how finished siding reads from the curb. A wall may have clean new boards, yet still look incomplete if the nearby jambs remain outside the scope. This project accounted for those transitions without treating them as part of the gutter work.
What exterior painting was included?
The paint scope reached farther than the new siding. It included fascia and soffit up to 24 inches, garage doors, the front door, and the porch ceiling. That breadth let the crew address those surfaces along with the siding work rather than leave each one for a separate exterior visit.
- The siding paint was Sherwin Williams Super Paint.
- Door painting was separate from garage door painting.
- Porch-ceiling painting was its own part of the scope.
- The fascia and soffit painting had a 24-inch limit.
Those limits are worth reading closely. A paint allowance for fascia and soffit up to 24 inches does not mean every painted surface on the home was included. On any paint proposal, check which surfaces it names so you know what the finished job should cover.
How did the gutter work fit the siding project?
The gutter portion specified custom Senox 6-inch seamless aluminum gutters. We treated it as a separate service within the same exterior project, not as a siding accessory. The six-inch size gives runoff a wider channel during Austin's heavy rain, while the seamless construction keeps joints along a run to a minimum.
- The custom Senox seamless gutters were a separate product from the James Hardie siding line.
- Aluminum was the specified gutter material; fiber cement was reserved for the siding.
- The approved project scope included both trades before installation began.
Keeping the two services separate helps you compare exterior proposals. A siding quote does not automatically include new gutters, even when both meet at the roof edge. This homeowner's project included each service explicitly, so the completed work covered both the wall finish and the gutters.
What was complete when the crew left?
July 28, 2026, was the last day of on-site work. The scope included punch-out items and two yard cleans, which are easy to overlook beside siding and paint. They still matter: the final stage of an exterior job includes dealing with work-area details, not just installing the main material.
Straight Answers
Questions About This Project
How long was the crew on site?
The installation window was four days, from July 25 to July 28, 2026.
Was the front entry door part of the siding price?
The installation was part of the project scope, but the homeowner was responsible for supplying the door materials before the siding work. Interior door painting was not included.
What was the project's budget range?
This project fell in the $20k–$25k range.
What warranty covers this work?
Coverage depends on the specific products installed, such as the James Hardie siding and Senox gutters. Ask for the warranty paperwork for each product rather than assuming terms from a brand name alone.
Get Your Free Siding Estimate
Tell us about your project — we'll call you back to schedule a free inspection. No pressure, honest numbers, 4.9 stars across 474 Google reviews.
Prefer to talk now? Call (512) 550-0000 · Mon–Fri 8–8, Sat 8–6, Sun 12–5
Keep Exploring
More Austin Pro Work
Siding
Siding
SidingOther work near this address










