
Completed September 2026
Windows in Anderson Mill West, Cedar Park, TX (September 2026)
Plus Exterior Painting, Siding on the same job
We installed 32 custom windows and completed a focused siding trim scope in Cedar Park, TX. The result was a completed window replacement project with James Hardie fiber cement trim included in the exterior work.
- Trades
- Windows, Exterior Painting, Siding
- Completed
- Brands installed
- NT Windows, Sherwin Williams, James Hardie
Standout outcome — All 32 custom windows were installed during the four days on site.
Timeframe — August 30–September 2, 2026; four calendar days on site.
Neighborhood/City — Anderson Mill West, Cedar Park, TX.
Vendor and product — NT Windows Executive windows and James Hardie Trim.
Job APS-4843
Scope of Work
What We Did
Installation of 32 Custom NT Windows Executive Vinyl Replacement Windows · James Hardie Fiber Cement Trim Included in Exterior Scope
Windows
This Windows in Cedar Park, TX project included NT Windows Executive vinyl replacement windows. The scope covered technician measuring, standard-size installation labor, and installation supplies. Vinyl offers a practical, low-maintenance surface in an area with heavy cedar pollen. The window installation was complete by September 2, 2026.
Learn more about our window replacement →Exterior Painting
Siding
This Siding in Cedar Park, TX project included James Hardie fiber cement trim. The work was limited to trim rather than full-wall siding replacement. Fiber cement was a sensible material for exterior trim exposed to Central Texas weather. The trim work was finished within the four-day installation window.
Learn more about our siding replacement →Service price ranges are for that work before any discounts. Any total project cost mentioned on this page may include applied discounts.
Wondering where this lands on price? See what windows typically costs in Austin →
How It Went
The Journey
From the first phone call to the final walkthrough — what actually happened on this project.
First contact
May 29, 2026The homeowner reached us through a realtor or inspector referral on May 29, 2026. We started scoping the project that day.
Evaluation
We evaluated a replacement scope of 32 custom windows and a smaller fiber cement trim scope. A window technician measured for the custom windows.
Planning & approval
June 1, 2026The project was approved June 1, 2026. We ordered 32 custom NT Windows Executive units on June 11, and they reached our warehouse in mid-August. James Hardie Trim was the specified siding product.
Installation
September 2, 2026On-site work ran from August 30 through September 2, 2026, spanning four calendar days. The crew completed the window installation and the trim scope. The job also covered installation supplies, delivery, and waste handling.
Completion
September 2, 2026On-site work finished September 2, 2026, with all 32 custom windows and the James Hardie trim installed.
6 Photos
Project Photos
Every photo is this job, shot on site by our crew in Anderson Mill West, Cedar Park, TX.
Want this on your house?
The Full Story
Inside This Project
What did this Cedar Park window project include?
This was chiefly a window replacement job, with trim as the smaller, separate siding scope. That distinction matters if you are comparing it with a full siding project. We installed 32 custom Executive windows; the siding work was trim, not new siding boards across the house.
- The window work included installation labor and a separate window technician measurement.
- The siding product was James Hardie Trim, made from fiber cement.
- The window work also included installation supplies.
A realtor or inspector referral started the conversation. The work at this Cedar Park home was custom window replacements and a limited trim scope.
How were 32 custom windows planned before installation?
The homeowner reached out on May 29, 2026, and we started scoping the project that day. Approval followed on June 1, and the 32 custom windows were ordered June 11. Those dates were planning and production steps, not days when a crew was installing windows. A window technician also measured for the custom order.
That measurement step matters on a multi-window order. You should not assume every opening is identical, even when a proposal groups standard-size installation labor under a limit of 132 united inches. That labor category describes how installation was priced; it is not the size of each of the 32 units. Matching a custom order to measured openings is a safer way to plan than buying from a rough count alone.
- The product line selected for this job was NT Windows Executive.
- Standard-size installation labor covered windows up to 132 united inches.
- The order reached our warehouse in mid-August, before the on-site work began.
- Delivery was its own charge, apart from installation labor.
Why use vinyl windows and fiber cement trim here?
The specified windows were vinyl replacement windows, while the siding work called for fiber cement trim. Cedar Park summers can exceed 100°F, so exterior material choices deserve a close look. Vinyl and fiber cement suit different parts of this project: one forms the replacement window unit; the other serves as trim.
There is a practical lesson in that pairing. A window order and a trim allowance can be part of the same exterior job without covering the same amount of wall area. Before comparing bids, check the unit count and the exact siding product on each one. On this job, the count was 32 windows.
- Executive was the NT Windows product line for this job.
- James Hardie Trim was the siding product, rather than a lap-siding product.
- The siding work was smaller than the window work and fell in the $2k–$5k range.
What happened during the on-site installation?
On-site installation ran across four calendar days, from August 30 through September 2, 2026. The May referral and June order were planning steps, not installation time. The window labor came in two parts: standard-size installation labor and separate window installation labor.
Keeping that distinction clear helps when you plan your own replacement project. Custom units must be available before installation can proceed, and this order had reached the warehouse by mid-August. Once work moved on site, the window and trim scopes were part of the same completed project.
- A dump fee was included for waste handling on the job.
- Installation supplies were accounted for separately from the window material cost.
- September 2 was the last day of on-site work.
What can homeowners take from the finished scope?
The completed job combined a large custom window order with a modest fiber cement trim allowance. That is a useful distinction for a Cedar Park homeowner reviewing bids: count the openings and check the trim work separately.
If you are checking the finished work, ask for the final product documents and confirm that the window count matches your agreement. Cedar pollen can leave visible buildup around exterior frames, so routine cleaning is sensible after installation.
- This was a homeowner project, not an insurance claim.
Straight Answers
Questions About This Project
How long did the installation take?
Four calendar days on site, from August 30 through September 2, 2026. The earlier approval and ordering dates were planning and production steps, not extra installation days.
What did this project cost?
This project fell in the $25k–$30k range. That is not a per-window price or a quote for another home.
Does this project include replacement of all the home's siding?
No. The siding work was James Hardie Trim, not new siding boards across the house.
What warranty covers these windows?
Coverage depends on the specific NT Windows Executive product installed. Ask for the warranty paperwork for your units rather than assuming terms from the product name alone.
Get Your Free Windows Estimate
Tell us about your project — we'll call you back to schedule a free inspection. No pressure, honest numbers, 4.9 stars across 474 Google reviews.
Prefer to talk now? Call (512) 550-0000 · Mon–Fri 8–8, Sat 8–6, Sun 12–5
Keep Exploring
More Austin Pro Work
Siding
Siding
WindowsOther work near this address
0.9 mi away
1.0 mi awayAll highlighted Austin Pro projects → · Austin Pro in Cedar Park → · Windows guides →








