Holiday Savings

10% off every exterior project, and it stacks up to 25% off.10% off exterior projects

28 days leftSee the deals
Siding in Jester Estates, Austin, TX — completed Austin Pro project

Completed June 2026

Siding & Exterior Painting in Jester Estates, Austin, TX

We stripped and re-clad a Jester Estates home with James Hardie fiber cement siding, then painted the full exterior in Sherwin-Williams SuperPaint. The finished walls in this Austin, TX neighborhood are flatter, tougher, and built for the heat.

Trades
Siding, Exterior Painting
Location
Jester Estates, Austin, TX
Completed

Standout outcome — A hail- and heat-resistant exterior with a clean SuperPaint finish

Timeframe — Approved May 15, 2026; install and paint done by June 8, 2026

Job APS-4824

Drag to Compare

Before & After

After: Siding in Jester Estates, Austin, TX by Austin Pro
Before: Siding in Jester Estates, Austin, TX
Before
After

Scope of Work

What We Did

James Hardie HardiePlank Select Cedar Mill Siding Installation · Full Exterior Repaint with Sherwin-Williams SuperPaint

Siding

This Jester Estates home got new James Hardie HardiePlank Select Cedar Mill 6.25" fiber cement siding over four days on site. Our crew installed 7/16" OSB sheathing first to give the boards a solid, flat base. Fiber cement holds up to Austin's 100°-plus summers and hail far better than old wood or hardboard. Sherwin Williams Super Paint sealed the project and boosted the home's curb appeal for years to come.

James HardieHardiePlank Select Cedar Mill 6.25"Fiber Cement Siding$5k–$10k
Learn more about our siding replacement →

Service price ranges are for that work before any discounts. Any total project cost mentioned on this page may include applied discounts.

Wondering where this lands on price? See what siding typically costs in Austin →

How It Went

The Journey

From the first phone call to the final walkthrough — what actually happened on this project.

First contact

May 10, 2026

The homeowner found Austin Pro through an internet search and reached out on May 10, 2026. They were dealing with worn siding on their Jester Estates home and wanted a lasting replacement rather than another patch job.

Evaluation

May 12, 2026

We started scoping the project on May 12, 2026, and inspected the exterior in person. Behind the aging boards we found soft, uneven sheathing that needed to be addressed before any new siding could go up.

Planning & approval

May 15, 2026

We scoped a full fiber cement re-clad in James Hardie Select Cedar Mill plus a complete exterior repaint. The homeowner approved the plan on May 15, 2026, landing the project in the $10k–$15k range.

Installation

Crews installed new 7/16-inch OSB sheathing to true up the walls, then hung the 6.25-inch HardiePlank boards over several days in late May. Sherwin-Williams SuperPaint followed once the siding was clean and set.

Completion

June 8, 2026

We ran two yard cleanups and a punch-out pass, wrapping the project on June 8, 2026.

6 Photos

Project Photos

Every photo is this job, shot on site by our crew in Jester Estates, Austin, TX.

Want this on your house?

Book a Free Inspection
Pick Your Time

The Full Story

Inside This Project

Why did this Jester Estates home need new siding?

Many homes in this pocket of northwest Austin date to the 1980s and 1990s. Their original siding starts to swell, crack, and peel after decades of sun and storms. This client found us through an internet search in early May and wanted a permanent fix.

  • Homeowner reached out May 10, 2026; approved the project five days later
  • Age-typical siding wear common to Jester Estates homes of this age
  • Homeowner wanted lower upkeep, not another repaint cycle
  • Retail project in the $10k–$15k range

What did the crew find behind the old siding?

Once the old boards came down, we got a real look at the wall structure. The existing sheathing had soft spots and uneven planes that would have telegraphed through any new siding. That is the part homeowners rarely see coming. If you nail fresh boards over a wavy base, the finished wall looks rippled no matter how good the material is. So we installed new 7/16-inch OSB wall sheathing across the affected sections to reset a flat, solid surface before a single Hardie board went up.

What materials did we use, and why?

We went with James Hardie HardiePlank in the Select Cedar Mill texture at a 6.25-inch reveal. Fiber cement was the clear pick for this climate. It will not rot, warp, or feed the moisture that wood siding traps during our humid spring storms.

  • HardiePlank Select Cedar Mill 6.25" primed lap boards
  • Fiber cement stands up to hail far better than wood or vinyl
  • Won't buckle in 100-degree-plus Austin summers
  • Materials sourced through local suppliers including Gtown Lumber and Southern Shingles

How did the painting go?

Paint followed once the siding was set and clean. We coated the primed boards with Sherwin-Williams SuperPaint, which grips fiber cement well and holds color against harsh UV. The pre-primed Hardie surface meant the topcoat laid down smooth and even.

  • Full-exterior coat of Sherwin-Williams SuperPaint
  • Primed Select Cedar Mill gave uniform paint adhesion
  • Color chosen to resist fading under direct Texas sun
  • Sealed surface sheds cedar pollen and rain more easily

What were the results?

The home now wears a flat, consistent exterior that reads brand-new from the street. Two rounds of yard cleanup and punch-out work closed the job on June 8, 2026. Every seam, edge, and painted board got a final check before we called it done.

  • Two-pass yard clean and punch list completed
  • Install ran over several days in late May, paint right behind it

Straight Answers

Questions About This Project

How long does a siding and paint project like this take?

This one moved from approval on May 15 to a finished exterior by June 8. The Hardie install ran across multiple days in late May, with painting following once boards were set.

Why fiber cement instead of wood for an Austin home?

Wood siding swells and rots in our wet springs and can split under hail. Fiber cement holds its shape through 100-degree heat and heavy storms, which is why we specified HardiePlank here.

What does a project in this range include?

This retail job landed in the $10k–$15k range and covered new OSB sheathing, full Hardie siding, and a complete SuperPaint finish. Delivery fees, materials, and two punch-out visits were all part of the scope.

Do I need to repaint fiber cement often?

No. A quality topcoat like SuperPaint on primed Hardie board holds up for years, far longer than paint over old wood siding. That lower maintenance is a big reason homeowners here make the switch.

Get Your Free Siding Estimate

Tell us about your project — we'll call you back to schedule a free inspection. No pressure, honest numbers, 4.9 stars across 474 Google reviews.

Thank you — we received it and will call you shortly.

Something went wrong — please call (512) 550-0000.

Prefer to talk now? Call (512) 550-0000 · Mon–Fri 8–8, Sat 8–6, Sun 12–5

Schedule an Appointment