Schedule Appointment
James Hardie
Simonton

Recent Project: Buda | Leisurewoods | Siding & Windows | 08-24-23 | APS-3679

James Hardie Fiber Cement Siding with Trim-Over Install | Simonton Max Energy-Efficient Vinyl Window Replacement

Schedule a Free Siding Inspection
Schedule Your Free Siding Estimate
A+ BBB Accolade
4.9 Rating

wHAT wE DID

Siding

James Hardie

This Buda project centered on new James Hardie fiber cement siding for a 1990s-era home in Leisurewoods. We used a trim-over install, which lets us build clean edges without stripping every board first. Fiber cement was the right call here because it shrugs off 100-degree heat, hail, and cedar pollen buildup. After the siding went up in late July, our crew painted it for a durable, finished look.

Learn More About Our Siding

Windows

Simonton

We paired the siding with Simonton Max vinyl replacement windows across this Buda home. The units were ordered in late May and installed over several days once they arrived in late June. Simonton Max windows help block summer heat gain and reduce noise. They also seal tighter than the aging originals, which matters during Central Texas storm season.

Learn More About Our Siding
How It works

The Journey

01
02
03
04
05

First Contact

The homeowner first reached out through our website back in the spring of 2021. They were exploring options for updating an aging exterior in the Leisurewoods neighborhood of Buda. We opened the conversation around siding and window replacement.

Evaluation

During the assessment, we found sun-faded and worn siding on the south-facing walls, plus gaps near the base tied to limestone soil movement. The original windows were dated and no longer sealing well. These findings shaped a plan built around durability and heat control.

PLanning & Approval

The homeowner approved the project on May 8, 2023. We finalized selections on James Hardie fiber cement siding with a trim-over install and Simonton Max vinyl windows. Windows were ordered in late May to lock in the schedule.

Installation

The Simonton windows arrived in late June and our crew installed them over several days right after. Siding installation followed in late July, running across multiple days one section at a time. Exterior paint from Sherwin Williams went on once the fiber cement was up.

Completion

We completed the project on August 24, 2023 and invoiced the same day, then closed the file on September 6. The final walkthrough confirmed a weather-tight, freshly painted exterior with new energy-efficient windows. Both products carry manufacturer warranties for long-term peace of mind.

Siding in Buda | Austin Pro

We replaced the siding and windows on a 1990s home in Leisurewoods, Buda, giving it a weather-tight shell built for Central Texas heat and hail. The home now wears James Hardie fiber cement over fresh paint, with new Simonton windows behind it.

Project at a glance

  • Services: Siding and windows
  • Location: Leisurewoods neighborhood, Buda, TX 78610
  • Vendor & product: James Hardie fiber cement siding; Simonton Max vinyl windows
  • Material: Fiber cement (trim-over install) plus vinyl replacement windows
  • Timeframe: Windows in late June, siding in late July, completed August 24, 2023
  • Standout outcome: A repainted, storm-ready exterior that resists heat, hail, and cedar pollen

Why did this Leisurewoods home need new siding?

The original siding had taken years of abuse from Buda summers and spring storms. Homes built in the 1990s often used wood or composite panels that swell, crack, and fade over time. This one was overdue for something tougher.

  • Old panels showed sun fade and edge wear on the south-facing walls
  • Limestone soil movement had opened small gaps at the base
  • Cedar pollen and grime had settled into the aging surface
  • The homeowner wanted a low-maintenance finish that would last

What did the crew choose, and why?

We went with James Hardie fiber cement using a trim-over method, and that choice came down to how this house was built. Trim-over lets us install new trim and siding without tearing every old board off first, which cuts labor and keeps the walls sealed during the switch. Fiber cement itself is the workhorse for Central Texas because it does not warp in 100-degree heat the way wood does. It also stands up to hail impact and never becomes a snack for pests. For a home in Leisurewoods facing decades more of Buda weather, it was the material that made the most sense long-term.

How did the window replacement go?

We handled the windows first so the siding could seal cleanly around the new frames. Simonton Max vinyl units were ordered in late May and arrived in late June, and the crew set them over several days right after.

  • Vinyl frames that won't corrode or need repainting
  • Tighter seals to cut summer heat gain and drafts
  • Better sound control from nearby road noise
  • Installed before siding so flashing and trim tie in properly

What did installation look like on site?

The siding phase ran over multiple days in late July, one wall section at a time. Our crew squared up the trim-over layout first, then hung the fiber cement and sealed every seam before moving on. Paint came after the panels were up.

  • Materials sourced through ABC Supply Co. and Home Depot
  • Exterior paint supplied by Sherwin Williams
  • Full exterior painting after siding install
  • Seams and joints sealed against wind-driven rain

What were the results?

The home came out with a clean, unified look and a shell built to last. Fresh paint over new fiber cement gives it curb appeal that won't fade fast under the Texas sun. The new windows finish the upgrade with better comfort inside.

  • Weather-tight exterior ready for hail season
  • A finish that resists fading, warping, and pests
  • Lower heat gain through the new glass
  • Project wrapped and invoiced August 24, 2023

Frequently asked questions

How long did the whole project take?

The homeowner approved the work in May 2023. Windows arrived in late June and went in shortly after, siding followed in late July, and we closed the file in early September.

Why is fiber cement a good fit for Buda homes?

Buda sees 100-degree summers, hail, and heavy cedar pollen. Fiber cement holds its shape and color through all of it, unlike wood that swells and splits over time.

What did a project like this cost?

This combined siding and window job fell in the $30,000 to $40,000 range. Final pricing depends on home size, product line, and how much prep the walls need.

Do the new materials come with any protection?

Both James Hardie siding and Simonton windows carry strong manufacturer warranties. Paired with a proper install and painted finish, that coverage helps protect the home for years.

GAF shingle roofGAF Master Elite Certificate
No items found.