Holiday Savings

10% off every exterior project, and it stacks up to 25% off.10% off exterior projects

37 days leftSee the deals
Siding in Timbergrove, Cedar Park, TX — completed Austin Pro project

Completed March 2026

Siding & Exterior Painting in Timbergrove, Cedar Park, TX

We reclad this Timbergrove home in Cedar Park with James Hardie fiber cement siding, then painted the full exterior in Sherwin Williams SuperPaint. The result is a straighter, tougher exterior built to handle Central Texas weather.

Trades
Siding, Exterior Painting
Completed

Standout outcome — A wood-look exterior that resists heat, hail, and rot without the upkeep of real cedar

Timeframe — Approved Feb 15, 2026; completed Mar 16, 2026

Job APS-4737

Drag to Compare

Before & After

After: Siding in Timbergrove, Cedar Park, TX by Austin Pro
Before: Siding in Timbergrove, Cedar Park, TX
Before
After

Scope of Work

What We Did

Complete James Hardie HardiePlank Select Cedar Mill Siding Installation · Full Exterior Repaint in Sherwin Williams SuperPaint

Siding

This Cedar Park siding project used James Hardie HardiePlank Select Cedar Mill 8.25-inch fiber cement siding. Our crew installed fresh 7/16-inch OSB sheathing and wrapped the double garage door jambs for a clean finish. Fiber cement was chosen because it resists warping, rot, and hail damage that plague older wood siding here. On-site work ran March 13 through March 16, giving the home a durable, low-maintenance exterior.

James HardieHardiePlank Select Cedar Mill 8.25"Fiber Cement Siding$10k–$15k
Learn more about our siding replacement →

Exterior Painting

This exterior painting job in Cedar Park used Sherwin Williams SuperPaint over the fresh James Hardie siding. Our painters coated the siding, fascia, soffit, garage doors, gutters, downspouts, and porch ceiling for one uniform look. SuperPaint was picked for its strong UV resistance during 100-degree summers. The painting phase wrapped up on March 16, tying the whole exterior together.

Sherwin WilliamsSuperPaintExterior Paint$5k–$10k
Learn more about our exterior house painting →

Service price ranges are for that work before any discounts. Any total project cost mentioned on this page may include applied discounts.

Wondering where this lands on price? See what siding typically costs in Austin →

How It Went

The Journey

From the first phone call to the final walkthrough — what actually happened on this project.

First contact

February 4, 2026

The homeowner found Austin Pro through an internet search and reached out on February 4, 2026. They were looking for a durable siding replacement and a full exterior repaint for their Timbergrove home in Cedar Park.

Evaluation

February 6, 2026

We started scoping the project on February 6, 2026, and set up an on-site assessment. Our team checked the condition of the existing cladding and the wall base behind it. We found areas needing new sheathing, which shaped the final scope.

Planning & approval

February 15, 2026

We built an estimate covering the James Hardie HardiePlank Select Cedar Mill siding, OSB sheathing, and a full Sherwin Williams SuperPaint package. The homeowner reviewed material and color selections and approved the project on February 15, 2026.

Installation

Crews removed the old cladding, set 7/16-inch OSB wall sheathing, then installed the 8.25-inch fiber cement lap boards over several days. Garage door jambs were wrapped, and painters followed with SuperPaint on the siding, fascia, soffit, porch ceiling, garage doors, gutters, and downspouts.

Completion

March 16, 2026

All work was completed on March 16, 2026, followed by two yard cleanups and a full punch-out to catch any final details. The job closed out on April 2, 2026, with a finished, weather-ready exterior.

4 Photos

Project Photos

Every photo is this job, shot on site by our crew in Timbergrove, Cedar Park, TX.

Want this on your house?

Book a Free Inspection
Pick Your Time

The Full Story

Inside This Project

Why did this Cedar Park home need new siding?

Older homes around Cedar Park take a beating from our climate. The original cladding here had worn down and no longer sealed the walls the way it should.

  • Summer days routinely push past 100 degrees, which dries and splits wood siding
  • Spring hail chips and cracks softer materials over time
  • Cedar pollen and moisture work into seams and speed up rot
  • The homeowner wanted a look that keeps its shape for the long haul

What did the crew find during the inspection?

Before any new boards go up, we open things up to see what is really happening behind the old siding. On this Timbergrove job, that step mattered. We found spots where the wall base was no longer flat or fully sound, which is common on homes of this age in limestone-soil neighborhoods that shift slightly over the years. That is why the scope included 7/16-inch OSB wall sheathing across the affected areas. A homeowner who skips this and installs new siding over a wavy or soft base ends up with visible bulges and boards that never sit right. Getting the sheathing flat first is the quiet part of the job that makes the finished wall look sharp.

What materials did we use, and why?

We went with James Hardie HardiePlank in the Select Cedar Mill texture at 8.25 inches wide. Fiber cement gives you the grain of real cedar without the swelling, cracking, or bug damage.

  • Select Cedar Mill face for a natural wood-grain look
  • 8.25-inch exposure for clean, modern lap lines
  • Double garage door jamb wrap for a finished, sealed edge
  • Single jamb wrap detail on the secondary opening
  • Material delivered through ABC Supply for the fiber cement package

How did the exterior painting come together?

Once the siding was up, we coated the whole exterior in Sherwin Williams SuperPaint. This step ties the new boards to every trim detail so nothing looks patched together.

  • Fascia and soffit painted up to 24 inches
  • Porch ceiling finished for a clean overhead look
  • Garage doors coated to match the body color
  • Gutters and downspouts painted per linear foot

SuperPaint holds its color under the strong UV that Cedar Park sees most of the year. That matters here, where cheaper coatings can chalk and fade within a few seasons.

How long did the whole project take?

Siding is not a one-day job, and we do not rush it. Prep, sheathing, board install, and paint each get their own time on site.

  • Siding install ran across several working days
  • Exterior painting followed once the siding was up
  • Two yard cleanups plus a full punch-out closed things out
  • All work wrapped on March 16, 2026

Straight Answers

Questions About This Project

Why is fiber cement a good fit for Cedar Park homes?

It handles our extremes without warping or rotting. Between triple-digit summers and spring hail, James Hardie board stays dimensionally stable where wood would move and split.

How much does a project like this cost?

This job fell in the $15,000 to $20,000 range. Final pricing depends on wall area, how much sheathing needs replacing, and the paint scope you choose.

Do I need to repaint fiber cement siding often?

Not for a long time. The SuperPaint finish we applied is built for UV resistance, so you get years of color before a refresh is even worth considering.

How soon can you start after approval?

This homeowner approved on February 15, 2026, and we completed the work by March 16. Scheduling depends on crew availability and material lead times through suppliers like ABC Supply.

Get Your Free Siding Estimate

Tell us about your project — we'll call you back to schedule a free inspection. No pressure, honest numbers, 4.9 stars across 474 Google reviews.

Thank you — we received it and will call you shortly.

Something went wrong — please call (512) 550-0000.

Prefer to talk now? Call (512) 550-0000 · Mon–Fri 8–8, Sat 8–6, Sun 12–5

Schedule an Appointment