Siding & Exterior Painting in Southhampton Hills, Austin, TX

Why pair siding and painting on this Southhampton Hills home?

The project called for more than putting new boards on the wall. Its scope included primed siding, paint for that siding, and work on several surfaces beside it. Planning both trades together let us address the exterior as one job rather than treating the paint as an unrelated add-on. That distinction matters on an older Austin home: a fresh siding surface can draw attention to adjacent areas left outside the plan.

• The siding selection called for the Select Cedar Mill texture, which has a wood-grain appearance.
• Separate paint items covered fascia and soffit, including a 25-to-36-inch or open-soffit category.
• Gutters and downspouts were included for painting by linear foot.
• The project also allowed for punch work after the main installation and paint tasks.

What did we establish before the crew arrived?

The homeowner reached out through a James Hardie referral on September 15, 2025. We inspected the home and began the estimate that same day. The resulting plan covered two services, not a siding-only installation.

• The homeowner approved the project on October 7, 2025.
• Primed Select Cedar Mill boards appeared in the material scope.
• Exterior paint was specified for the siding rather than listed only for trim.
• Delivery was included among the planned job items.
• No roofing, window, or door replacement formed part of this project.

Why use this fiber cement profile in Austin?

We chose the specified 8.25-inch Select Cedar Mill boards to give the home a defined lap-siding pattern and cedar-like texture without using cedar boards. Fiber cement is a practical choice for a siding project facing Austin's 100°+ summers. The key measurement is the board's stated 8.25-inch size; it should not be mistaken for a promise about the visible exposure after installation. We also planned for a painted finish from the outset because the siding material was primed, not listed as factory-finished.

• James Hardie supplied the siding specified for this home.
• The material schedule included both primed Select Cedar Mill and 8.25-inch primed Select Cedar Mill entries.
• Sherwin Williams SuperPaint was the named product for painting the siding.
• The paint work extended beyond the fiber cement boards to the fascia and soffit.

How did the siding installation and paint work unfold?

Our crew worked across the scheduled multi-day installation window, then finished on November 24. The scope joined siding placement with exterior paint work, so completion meant addressing both trades. We also had delivery, cleanup, and punch items to handle around the main work.

• On-site installation began November 21, 2025.
• The new siding was the primed Select Cedar Mill profile selected for the home.
• SuperPaint was specified for the siding paint portion.
• The scope listed two yard-clean items along with punch work.
• A separate punch-out item provided for final detail work.

Which surfaces received attention beyond the new boards?

Painting the siding alone would not have covered the full exterior painting scope. Fascia, soffit, gutters, and downspouts were also included. These are separate surfaces, and each needed to remain accounted for while the siding work moved toward completion.

• The fascia and soffit paint item covered a 25-to-36-inch or open-soffit condition.
• Gutter and downspout painting was measured per linear foot.
• A general paint item appeared alongside the more specific surface entries.
• The paint selection was Sherwin Williams SuperPaint, not a siding replacement product.
• No gutter or downspout replacement was included in the listed services.

What did the homeowner have when we finished?

The crew completed its on-site work on November 24, 2025. At that point, the project covered the planned siding and exterior painting tasks, including the adjoining surfaces named in the scope. The result is a coordinated exterior finish without suggesting that unrelated parts of the home were replaced.

• The project was completed in Southhampton Hills, within Austin's 78745 ZIP code.
• The siding work used James Hardie fiber cement rather than natural cedar.
• The painting scope included both wall surfaces and exterior detail areas.
• Yard cleanup and punch items were part of the work plan.
• This was a siding and painting project, not a roofing project.